Tighten the locknuts, the axle nut and the brake caliper bracket bolt to the specified torques. Brake pedal page 3-7 5. Battery The engine turns over The battery is good. Starter choke knob page 3-10 3. Avoid using strong acidic wheel cleaners, especially on spoked 2. Air filter element page 6-15 7.
The chart below is printed only as a reminder that maintenance work is required. The key can be re- moved. Shift pedal page 3-6 2. However, the spark plug should be tightened to the speci- fied torque as soon as possible. Keep the clutch lever pulled.
Keep the drive belt slack within the specified range. Air filter check hose 2. Shock absorber assembly spring preload adjusting nut page 3-14 8. Start the engine by pushing the. Speedometer unit page 3-3 4. Odometer and clock fuse backup fuse Main fuse: 30 A The main fuse and the fuse box, which.
Install the oil check bolt, and then Tightening torque: check hole, remove the oil filler tighten it to the specified torque. Remove the turn signal lens by re- 1. If accessories are added to the handlebar or front fork area, they must be as lightweight as possible and should be kept to a minimum. Spark plug gap problems yourself. Fuel tank cap page 3-7 3. Engine oil filler cap page 6-10 5. Remove the air filter element by Cleaning the air filter element removing the screws, and then dis- The air filter element should be cleaned connect the hose shown.
Place the motorcycle on the side- ed in step 2 from the measure- stand. To apply the front the motorcycle. Good luck and have a wonderful day. It represents the high degree of crafts- manship and reliability that have made Yamaha a leader in these fields. Shock absorber assembly spring 10.
Disconnect the headlight coupler, again, have a Yamaha dealer This motorcycle is equipped with a and then remove the bulb cover. Record the information on this label in the space provided. This highly detailed Digital Repair Manual contains everything you will ever need to repair, maintain, rebuild, refurbish or restore your vehicle. Good luck and have a wonderful day. Have a Yamaha dealer check the vehicle.
If tion and, if necessary, have a Yamaha necessary, adjust the brake light switch dealer adjust it. Apply a thin coat of engine oil to 43 Nm 4. Move the windshield to the other Securely tighten the windshield shield angle can be adjusted and the position. Good luck and have a wonderful day. Install the headlight unit by install- from a lit headlight bulb, and do not ing the screws. Right handlebar switches page 3-5 6.
Start the engine, and then let it idle leakage is found, have a Yamaha deal- with the remaining oil quantity for several minutes while checking er check and repair the vehicle. Spring preload adjusting bolt 1. Such an inspection can be accomplished in a very short time;. Use extreme caution when selecting and installing any accessories. Push the fuel tank cap into posi- tion with the key inserted in the lock. Tachometer unit page 3-4 5.