Keep both hands and espe-cially your thumbs on the outside of the rim. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt. Then, consult your doctor to see if you should disable the entry function. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. Press and hold the button from to the station is to be set to until you hear a beep. There are more difficult plastic-type material coatings than in a Lexus, but those plastic materials are perfectly grained and built with care. Wait until your vehicle reaches a location with a stronger signal.
Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface. To cancel, press the button again. Stopping the alarm deactivates the alarm system. All of these models are the front-tire drive. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. To cancel, press the button twice. The antenna can be removed from the base by turning it.
Our 2012 Toyota Highlander repair manuals include all the information you need to repair or service your 2012 Highlander, including diagnostic trouble codes, descriptions, probable causes, step-by-step routines, specifications, and a troubleshooting guide. Press and hold to continue increasing or decreasing the volume. To ensure that the sensors operate prop-erly, do not touch or cover them. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury. Shift into P and turn off the engine. Operating the lights and wipers 2 When driving Type D The daytime running lights turn on. Do not exceed the posted towing speed limit.
Chain size is regulated for each tire size. If you replace the tires, the area displayed on the screen may change. Pushing and holding: Sounds alarm Page 26 49 1-2. Follow the procedure below to restart the engine after the system is activated. Refrain from using the system until the downhill assist control system indicator stays on. Indicates that the auto- If the light does not go off, matic transmission fluid contact your Toyota dealer.
The right hand signal will flash until you release the lever. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident. Opening, closing and locking the doors 1 Before driving Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked door locking function Shifting the shift lever out of P locks all doors. Make sure that the belt is not twisted. The head restraints will fold down automatically when the straps are pulled. To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the settings have been changed. Key information Keys The following keys are provided with the vehicle.
Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will become available. They can be turned on only when the headlights are on in low beam. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer. Press to turn the fan off. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri-ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or accident. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically.
Specifications Tire related term Meaning 150 lb. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Finally, it will tilt down, open and close. Make sure the top tether strap is securely latched. Check to make sure that the moon roof is completely closed and then release the switch.
Failure to do so may cause death or serious injury. Stow the second center seat in the console box. Replace a flat tire with a new one. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Do-it-yourself maintenance Turn the bulb counterclockwise. When driving Driving, stopping and safe-driving information.