In the same collision, occupants wearing seat belts would be much safer. Always sit in the front passenger seat properly with the seatback upright and feet on the floor With Driver and Front Passenger Occupant Classification System : Your front passenger seat has weight sensors, sitting in the front passenger seat improperly out of position or with the seatback reclined too far while the vehicle is moving is dangerous as it can take off weight from the seat bottom and affect the weight determination of the front passenger sensing system. The warning light turns off after a specified period of time. Press the programming button 1, 2, or 3 that you selected when programming your seat and outside mirror angle positions. Do not drive with the seatback unlocked: All of the seatbacks play an important role in your protection in a vehicle.
Return the second-row seatback to its upright position and lock it after sliding it backward. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries. Seat positions and outside mirror angle positions for up to three people can be programmed into the memory using the three available programming buttons. Have your seat belts changed immediately if the pretensioner or load limiter has been expended: Always have an Authorized Mazda Dealer immediately inspect the front seat belt pretensioners and air bags after any collision. The seat belt will be too long and not fit properly.
Please refer to the manual for a detailed explanation. To return the belt to the more comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level area, retract the belt fully to convert it back to emergency locking mode and then extend it around you again. If the illumination is too dim during the day, press the knob, or if the illumination does not dim when turning on the headlights at night, press the knob. Seat belt guide qFastening the Seat Belt 1. The seat may be heated excessively and cause a low- temperature burn. In a sudden stop or collision, the user could slide under the belt and suffer serious injuries.
We at Mazda design and build vehicles with complete customer satisfaction in mind. Push the lever backward to decrease firmness. If the air conditioner does not operate properly, consult an Authorized Mazda Dealer. A seat belt with an expended pretensioner or load limiter is still better than wearing no seat belt at all; however, if the front seat belt pretensioners and load limiters are not replaced, the risk of injury in a collision will increase. To enable seat belt automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system.
. With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children. Do not use an improper extender: Using a seat belt extender that is for another person or a different vehicle or seat is dangerous. Ask your doctor for specific recommendations. Rotate inner ring away from you clockwise for less sensitivity requires more rain to turn wipers on and toward you counterclockwise for more sensitivity requires less rain to turn wipers on. Lumbar Switch Push forward or backward to increase or decrease lumbar support.
If the seat belt guide is not used, the shoulder portion of the center-rear seat belt could be mistakenly positioned under the head restraint; a position that cannot provide adequate protection in a collision and could result in the center-rear passenger being seriously injured or killed. With no support behind your head, your neck could be seriously injured in a collision. It could be used accidentally by the new owner of the vehicle. Make sure the seatback is secured by attempting to lightly move it forward and back. The warning label reminds you not to put a rear-facing child-restraint system on the front passenger seat at any time. Bookmarks, search function, table of contents.
Ø Do not use the switch to make more than one adjustment at a time. Only use the extender provided for you and for the particular vehicle and seat. V erify the displayed 6-digit code on the audio unit, which is also displayed on the device, and touch the Yes on-screen button. Please refer to the Navigation System Owners Manual section of www. If the belt does not fully retract, pull it out and check for kinks or twists.
An accident could damage the belt webbing of the seat belt in use. Shift Position indicator Light Flashing: Differential oil temperature is high; dealer inspection required. Ø The front passenger seatback contacts the second-row seat. Slide the seat all the way back toward the rear of the vehicle. Ø A rear passenger or luggage pushing or pulling down on the front passenger seatback. The cup holder is a dead zone for transmitter reception. The head restraints are intended to help protect you and the passengers from neck injury.
The occupants or repairers could be seriously injured. . Always wear your seat belt and secure children in the rear seats in appropriate child restraints. This gas normally has no effect on occupants, however, those with sensitive skin may experience light skin irritation. Always make sure the shoulder portion of the center- rear seat belt is on the right side of the left-rear head restraint and guided correctly through the seat belt guide. We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure and in your full satisfaction with your Mazda product. After adjusting the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.